| Customization: | Available |
|---|---|
| Type: | Water Jet Loom |
| Voltage: | 220V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
KSP918-150 water-jet plastic weaving loom is a plastic knitting machine independently developed by our company and compatible with low weight. Our factory has abundant experience of manufacturing and weaving, at the same time, we keep learning advanced technology from the same industry abroad. Combined with the actual situation of our factory, we successfully developed this model after many years of improvement.
This equipment can be used for weaving high-weight container fabrics and low-weight woven fabrics.
The equipment adopts the direct-feeding warp let-off method of the creel, and is designed to install a creel with 3,500 heads. The yarn disc adopts a large yarn disc, which can better ensure the flatness of the warp and is not easy to loop. Weft insertion adopts electronic weft feeder. The shedding methods are divided into flat sheddingand cam shedding, and the shedding amount is increased to make the weft thread passin a more easy way. Two rubber rollers squeeze water dehumidification are used to reduce the moisture content of the fabric: no more than 4% for high gram weight and no more than 1% for low gram weight. The electric heating edge ironing device can automatically iron and cut the edge of the fabric while rolling the fabric, and uses two sets of waste edge devices. The independent cloth rolling method outside the machine allows the cloth roll diameter to reach 1.2 meters, and the use of hanging rubber rollers can ensure the synchronization and reliability of the cloth rolling. The electric appliance adopts Qingdao Shenghong electric appliance with Korean technology. The electric device can realize the synchronization of let-off, take-up, weft insertion and electric ironing. The short weft phenomenon in the weft insertion can automatically be stopped. The operation is simple, easy to understand, safe and reliable.
Main features:
Strong and sturdy machine frame
The two-sided large board adopts a conjoined type, which is more stable, and the four supports are thickened, and the air-jet loom is used to fix the bracket to make it more firm. All the rubber rollers are glued with seamless steel pipes.
Scientific internal structure system
Through the high wear resistance of the drive system and the reduction of wear on the rocker, the actual operating speed is increased.
Wide applicability of knitting machines
KSP-918 water jet plastic weaving loom can guarantee safe and stable production, no matter it is P.P, P.E or various high-weight products such as wrapping paper and container bags.
Good production performance
KSP-918 water jet plastic weaving loom can not only weave in widening width, but also can reach up to 750 rpm according to weaving conditions.
High economical efficiency
KSP-918 water jet plastic weaving loom can make the operation easier, even unskilled workers can operate it. The design of this model is precise, the processing is solid, and the mechanical maintenance is relatively easy.
| Model No. | KSP918-150(Crank Opening) | Cloth Rolling Method | Tension Automatic Control Motor (Maximum Cloth Rolling Diameter is 1200 cm) |
| Condition | New | Weft Insertion Method | Mechanical or Electronic Weft Storage (Electronic Single Jet or Electronic DoubleJet) |
| Reed Width |
190cm, 230cm, 260cm, 280cm, 340cm, 420cm, 560cm, 650cm (Can be Made According to Customer's Requirements) | Shedding Method | Flat Opening or Cam Opening |
| Selvedge | Electric Heating Type Ironing Device | Drive Mode |
Four-Link Crankshaft |
| Power | Main motor: 1.8 Kw, 2.2 Kw Control Motor: 1.15 Kw Electric Thermal Cutting: 1 Kw | Let-off Mode |
Creel Direct Positive Feeding |
| Dehumidification Method | Squeeze Water and Absorb Water |
About water jet loom
Question:What rotate speed can a water jet loom achieve?
Answer:The rotational speed of a loom is related to factors such as reed width, fabric type, and yarn specification. Our 8010 model is designed to rotate at a maximum speed of 1200 rpm, but may vary slightly depending on the type of fabric.
Question:What is the power consumption of a water jet loom?
Answer:The power consumption of water jet looms is related to the appropriate motor power, typically between 2.2 kw and 4.5 kw. Users can choose to install a motorized spindle, which saves 20% - 25% more power than ordinary asynchronous motors.
Question:How much water does a water jet loom consume per day?
Answer:The water consumption of a water jet loom is related to the loom speed, operating efficiency, and the warp and weft density of the fabric. Generally speaking, the average daily water consumption in 24 hours is 3-5 tons. Water jet loom with water circulation treatment system can achieve 100% water recycle.
Question:What kinds of fabric water jet looms can made?
Answer:Water jet looms are widely used in the field of chemical fiber,common high-density products such as clothing fabrics, home textile products, spandex fabrics, shade fabrics, luggage fabrics, lining cloth, and fluffy fabrics can be woven using water jet looms.
){kind=link}